 
|
| System Controls |
|
Canariis Corporation uses standardized industrial grade U/L listed and/or recognized components with a "unit circuit" concept when possible. A variety of standardized "unit (or sub) circuits" are combined to provide optimum results with a minimum of components. While each panel is custom, it is comprised of the same circuits over and over - panel to panel. When additional flexibility and circuit complexity is required an industrial grade programmable controller may also be used. These approaches, we believe, give the best of both worlds, a custom approach coupled with recognized circuitry which field service personnel should be easily able to trouble-shoot or field modify if necessary. The control panel consists of two major circuits. The motor power circuit and the control circuit all housed in a suitable enclosure. All Canariis Corporation panels are U/L LISTED ENCLOSED INDUSTRIAL CONTROL PANELS. The motor power circuit consists of the main disconnect(s), fuse blocks and fuses, or circuit breakers, magnetic starters with 3 leg overload protection, resets, and all necessary power wiring. The control circuit consists of a fused 115 volt control transformer with low voltage control wiring and all necessary relays, timers, switches, lights, push buttons, alarms, contacts, alternators and phase and voltage protection devices as necessary. The control circuit can incorporate a programmable controller which will replace all applicable relays, timers and alternators.
|
7905 Eagle Palm Drive
Riverview, Florida 33569
Phone: (813) 621-8643
Fax: (813) 626-2178
info@canariis.com